Command™ Décor Damage-Free Wall Tiles give you complete freedom. Freedom from nail holes, freedom to create your own look and freedom to change it up as often as you please.
Start by cleaning the surface of your wall with rubbing alcohol. Let dry. Then separate the Command® Strips.
Next, press one strip against the back of the base until you hear it lock. Then remove the liner from the back of the strip.
Now position the base on your wall using the built-in level as a guide. Make sure you press firmly against the center of the base for 30 seconds!
Grab the bottom corners of the base and peel it away from the wall — do not pull it straight off! The strip will remain on the wall.
Now press FIRMLY on all three areas of the strip for 30 seconds. Wait one hour.
Reposition the base over the strip. Press the center of the base firmly until you hear it lock into the strip.
The fronts magnetically attach to the base. Simply center the front on the base and release.
Fronts can be easily removed by lifting from one edge.
The Command™ Décor base works with all fronts. Switch them out or rotate the designs to create unique arrangments.
All in all the whole system is a great idea that's
been executed well. Flexible, customizable, easy
to remove or reposition, sturdy but lightweight
construction, expandable, attractive prints...
This gets a big thumbs up!
– Amazon Customer Review